OK, I haven't posted photos lately, so here goes.

Here's what my liquid soap looks like:
So 1.5 lbs of oil made about 3/4 of a gallon of liquid soap.  It's a really liquidy soap.  I didn't use anything to thicken it up so it's pretty runny.  But look how clear it is!  Yay!

And in case you ever wondered where I put all this soap:
Most of it is in the garage.  All the fragrances combined can be quite heady so they live mostly in the garage.  I have a small metal mesh drawer unit which holds most of the soap that have cured and many are packaged.  The green baskets on top which are re-purposed flower baskets used at flower markets I use to cure the soaps.  I do have a smaller stash in the house which are unfragranced or naturally fragranced with oatmeal milk and honey.

Bottom, middle, and top drawers
   

Here's a peek into the curing baskets.  The soaps are all cut up and resting.  Before I use the soaps I give them at least 4 weeks of curing time to evaporate moisture and get harder and longer lasting.
  
The plastic baggies contain trimmings from various soaps.  I can reuse these trimmings and shreds for confetti soaps. 

This past week I made Liquid soap!  I used an old slow cooker.  Mixed olive oil, coconut oil, cocoa butter with potassium hydroxide and water.  I cooked it for 5 hours and everything I have read said that by 3-4 hours I was supposed to have a paste that looked like petroleum jelly sort of translucent.  At 5 hours I had something that looked like mashed potatoes.  I pulled some of it out to dilute into boiling water.  It's supposed to be fairly clear, but mine was murkey cloudy.  But it did lather nicely so I knew it was indeed soap.  I have read that if the liquid soap is cloudy then it probably needs to cook longer.  Well, I needed to go to sleep so I had to turn the slow cooker off.   The next night I cooked for a couple more hours.  It still looks like mashed potatoes, maybe a little less opaque, but no where near petroleum jelly.  I determined that after 7 hours of cooking that it was DONE.

Tonight I am in the process of diluting my paste with later to make liquid soap.  I heated the paste and water in the slow cooker.  The paste is just about melted into the water.  This liquid soap looks much more clear than the tester.  So maybe indeed the paste needed to cook longer.  I need to find a container to store the 6.5 lbs of liquid soap I just made.  I think that's about a gallon.  I'm going to keep this whole batch uncolored and unfragranced.  That way when I pour it into smaller containers I can decide what fragrance and/or color to use.  I don't want to use the same color and/or fragrance for the whole batch. 

Was it worth it to do all of this work rather than buy liquid soap at the store?  Hmm… saved a little money, but spend a lot of time on it.  But it's a true soap, without any synthetic detergents which so many of the store bought liquid cleansers contain.  Have you looked in the ingredients of your liquid cleansers?  Ever seen Sodium lauryl sulfate (SLS), sodium laurilsulfate
or sodium dodecyl sulfate (SDS or NaDS), or Sodium laureth sulfate, or sodium lauryl ether sulfate (SLES)?  These are all detergents and surfactants.  I can say for sure that I have liquid SOAP and I know exactly what's in it.  Is it worth it?  I liked making it.  It was a good experience and I'd do it again.  Especially now that I know what to expect.  Not sure why my soap took so long to cook.  Maybe it's the slow cooker.  Anyway, I'd make it again.

This weekend I made 2 lbs of soap.  I used a coconut oil, olive oil, cocoa butter recipe with sodium lactate.  I split it into four 1/2 pound (about 2 bars) batches and added of the following additives for the different batches: 

There is a significant difference in coloration between the gelled milk soaps and the non-gelled milk soaps.  I did this test with bastile soap, but those won't be really ready to use for months, so that's why I repeated the test with a recipe that should be ready in about a month. 

When I compare the fragrance of the powdered milk soaps with the bastile half and half, oatmeal, honey soaps I think the half and half soaps smells more buttery.  I don't know if it's because I used half and half as opposed to milk or if it's because I used powdered milk.  It was much easier to do than the frozen half and half that I had to use last time. 

I also did all the soap making at about room temperature.  Which means I let the lye water cool down and the melted oils/butters to cool down to about room temperature before mixing.  I had much more time to work the batter.  I could add additives, fragrances, and color (if I chose to) with plenty of time to play.  Usually I soap much warmer and the batter thickens up pretty quick.  If I'm not careful I end having to glop the soap into the molds rather than pour.  I think I really like room temperature soaping.  I can make a larger base batch and still have plenty of time to divide it up to add different fragrances or colors or other additives. I just have to wait for everything to cool down, which can be tricky for an impatient person. 

I forgot or ignored the fact that milk soaps, when allowed to gel, turn the soaps medium brown/tan color.  Duh!  The milk sugars carmelize in the heat and darken the soaps.  So it doesn't really matter what colorants I put into the soaps.  Oh well, next time I try to prevent gel by putting them into the freezer after I pour. 

The sodium lactate is WONDERFUL!  I unmolded and cut the soaps at about 11 hours.  That's really quick (I couldn't wait until tomorrow)!  They all came out of their molds lickety split and the fondant texture mat made clean, beautiful impressions on the soaps.  All the fragrances came out really nice.  Champagne, cherry blossom, coffee bean, and white tea and ginger. 

So I did a little masterbatching today.  I mixed enough of the oils to four 1 lb batches of soap; and enough lye water for those 4 lbs of oil.  That way I can weight out enough of both to make my 1lb batches with different fragrances and/or color.  I chose a basic coconut oil/olive oil/tallow recipe.  I also added sodium lactate and used goat's milk for each of the batches.  The sodium lactate is supposed to make harder bars of soap.  I put each of the batches into different molds and used different fragrances.  I did use some of the Wilton's fondant texture sheet, so we'll see how those turn out.  The masterbatching went quite well.  I think next time I'll do batches with powdered buttermilk ad added silk powder or oatmeal and honey (this time not in a castile soap) or kaolin clay…

Oh yeah, the bastile soap I made a couple of weeks ago with colloidal oatmeal and honey smells WONDERFUL.  A real natural yummy scent.  Every time I stop by them I have to sniff them.  I can't wait to use them, months from now.  That's why I want to make the oatmeal honey soap in a recipe that doesn't require as much cure time as castile/bastile.  I also wonder what the difference will be between the half and half that I have used in past bars compared to the powdered goat's milk that I used today. 

So, planning my next soaps.  Even though my mass testing of various recipes has ended, I really like 1lb batches.  I get 4-5 bars out of each pound.  I'll pick just of few of the many recipes I have made and continue to play.   I'm still playing around with fragrances, molds, coloring.  I've also purchased some sodium lactate, which is a humectant as well as being know to harden up soaps.  I do like harder bars of soap, so maybe using sodium lactate will harden up some of the softer recipes.  I continue to purchase fragrance oils and essential oils.  I have more than I know what to do with.  It's too bad I can't smell them before purchasing.  I also purchased a fondant imprint mat.  Usually it's used to impress a pattern onto cake fondant, but wouldn't it produce a nice imprint onto soap.  Wilton Graceful Vines fondant imprint mat  Hopefully.  I've made my Half and Half soap.  I purchased some powdered goat's milk and buttermilk.  I haven't tried the powdered versions so that'll be new.  I also have some Micro Fine Silk Powder to add silkiness and slip, and Kaolin clay which also adds slip and is supposed to be good for oily skin.

I've purchased more MP soap.  I want to make more glow-in-the-dark soaps among other designs.

I think I will try to make those room fresheners, the ones with the sticks in a bottle with fragrance oil in the bottle.  I just need a place to put the bottles where the cats can't knock them over.  I am also waiting on an order of some absorbent beads that I can impregnate with fragrance and put into sachets.

I just got some Potassium Hydroxide so maybe this weekend I'll try making some liquid soap.

Yesterday I made 2 lbs of bastile soap.  I used light flavor olive oil.  I used this type of olive oil initially with my very first castile/bastile soap which I found hardened right away. I was able to cut them up at less than 24 hours old.  Since that initial batch I purchased some pomace olive oil.  When I made bastile soap with pomace I had problems with very soft soap.   The non-gelled soap that was sweating lye water was made from this pomace oil.  Other soap recipes that included this pomace oil seemed to be OK, but when the pomace oil was at higher percentages then the soap was really soft.  I hear that's pretty common with castile/bastile soaps.  Anyway I was curious so I went back to that light olive oil that I used way back when.  Maybe light olive oil  makes for a harder bar much quicker than pomace. 

No fragrance or colorant was added.  I used frozen half and half instead of water and I added honey and colloidal oatmeal to the mix.  I did CPOP and forced gel because I like the toasted smell (not burnt smell) and I don't mind the darker colored soap.  I used some bubble wrap to simulate honey comb.  I unmolded and cut in less than 24 hours.  No problems with soft squishy soap like when I used pomace.  The color is a dark caramel color with flecks which I'm assuming is from the colloidal oatmeal.  The fragrance is wonderful.  A natural sweetness and creamy buttery smell from the honey and half and half.  I hope some of the smell stays around after the long cure that is desireable for high olive oil content soap.  The oatmeal is colloidal so it's been super fine ground and should not be scratchy.  This soap should be super mild to the skin. 

I think I need to make more Oatmeal Milk Honey soap using another recipe that doesn't require such a long cure time.   I may stick to using this light olive oil rather than going back to the pomace, at least with any recipe that requires higher percentages of olive oil. 

So, I didn't like the look of the soaps I had made in the Nutter Butter trays.  They were just too shallow and the soap didn't pick up the ridge detail in the tray.  So I tried making confetti soap again.  So I shredded some of the blue Nutter Butter tray soap and also cubed up some of it.  I made up some more soap which I colored with Titanium Dioxide to make it white in color.  Then I tossed in all the shreds and cubes and poured into a mold.  I sprinkled some cosmetic glitter over the top.  The glitter will wash off.  I cut the soap up today and it came out pretty good. 

I used a wire cheese slicer, but it doesn't cut very smoothly.  I switched back to a knife which produces a very smooth surface. 

I have been testing my various recipes.  I gave each soap 2 showers before I moved on to the next.  These soaps had a variety of percentages and cominations of the following oils: coconut oil, palm oil, palm kernel oil, cocoa butter, shea butter, olive oil, castor oil, jojoba oil, mango butter, lard, canola oil, avocado oil, sweet almond oil, and rice bran oil.  My soap dish won't fit all of the soaps so I moved onto my shower doors railing. 

There are a few more soaps in the shower caddy off to the right as
well.  All of them except for 3 on the rail and 2 on the caddie were made by me.  All of them are cold process/hot process except for 3, the stripy one 4th from the left and 2 on the caddie, are melt and pour.  I used different fragrances and colors techniques for each of them.  I also experimented with different molds.  So, that's why some of the soaps are different shapes.  These are all the test recipes except for the 3 tallow recipes which are not ready to use yet.  I've pretty much decided that all the recipes pretty much feel the same to me.  So, for the future I'll just pick a couple of them and stick with them. 

I made glow in the dark skull and cross bones soaps using an ice cube
silicone mold.  I used some glow in the dark powder to mix in with some
translucent melt and pour soap, some black oxide into the same translucent M&P soap, and white M&P soap.  They are so cute!!  I fragranced them with star anise fragrance oil.  Ever since I started eating fennel I have really started to like the anise/fennel fragrance.  I was never a real fan of black licorice, but I find I really like the scent now.

And they actually glow in the dark!!

Oh what fun!!  Great for Halloween or anytime you want some spooky fun!